Workplace Noise Assessment FAQs

When is a workplace noise assessment required in the UK?

A workplace noise assessment is required where employees may be exposed to noise at levels that could represent a risk to their hearing or where there is uncertainty about whether exposure is adequately controlled.

The assessment should consider the level, duration and pattern of exposure, the employees affected, existing control measures and whether further action is required under the UK noise regulations.

A formal noise survey is not necessarily required for every workplace. However, where exposure is uncertain, variable or potentially significant, workplace measurements and personal noise dosimetry can provide objective evidence of employee exposure.

Validate Consulting can help with workplace noise risk assessments, noise surveys and personal noise dosimetry, providing practical recommendations based on actual workplace exposure.

How much does a workplace noise assessment cost?

The cost of a workplace noise assessment depends on the size and complexity of the workplace, the number of employees and processes involved, and whether personal noise dosimetry or detailed measurements are required.

A small workplace with a limited number of noise sources may require a relatively straightforward survey, while a large manufacturing site may require measurements across multiple departments and representative personal exposure monitoring.

A noise assessment conducted by one of our competent consultants start form around £1200.00

At Validate Consulting, we recommend defining the scope of the assessment before providing a quotation. This ensures that you receive the level of monitoring appropriate to the risks rather than paying for unnecessary measurements.

Need a quotation? Contact Validate Consulting to discuss your workplace and noise assessment requirements.

How often should workplace noise assessments be carried out?

There is no single fixed interval at which every workplace must repeat its noise assessment. The assessment should be reviewed when there is reason to believe it is no longer valid or when significant changes occur.

This could include:

  • New machinery or equipment 
  • Changes to production processes 
  • Changes to working hours or staffing 
  • Building or workplace modifications 
  • Changes to noise controls 
  • Complaints or concerns about noise 
  • Evidence that exposure may have increased 

Some organisations also undertake periodic reassessments as part of their occupational health and safety management system.  We recommend a review every 2 years.  

The frequency should be risk-based rather than simply calendar-based.

What are the UK workplace noise exposure limits?

The UK noise regulations establish lower and upper exposure action values and an exposure limit value.

For daily or weekly personal noise exposure, the values are:

  • Lower exposure action value: 80 dB(A) 
  • Upper exposure action value: 85 dB(A) 
  • Exposure limit value: 87 dB(A) – (After the effect of hearing protection) 

There are also corresponding peak sound pressure values.

These values should not be interpreted simply as a boundary between “safe” and “unsafe” work. Employers must assess and control noise risks and reduce exposure so far as reasonably practicable.

Hearing protection can be an important part of the control strategy, but it should not automatically be regarded as the primary solution.  It is often used as an interim control while noise reduction steps are taken.

Do I need a noise assessment for construction or manufacturing workers?

Yes. Construction and manufacturing environments can involve significant noise from machinery, power tools, vehicles and production processes.

However, the requirement depends on the actual exposure, not simply the industry.

A small workshop may have significant noise exposure, while some manufacturing environments may have relatively low exposure.

A workplace noise assessment can identify which employees and activities are actually exposed and help employers focus control measures where they are needed.

How do I know if my employees are exposed to excessive noise?

There is a simple test to indicate if workplace noise may warrant further investigation.

As a general rule, if two people have to raise their voices to talk 2m apart – this is likely to be around 80 dB(A).

If two people have to raise their voices to talk 1m apart – this is likely to be around 85 dB(A).

However, communication levels are not a reliable way of determining exposure.

In both situations, a noise assessment carried out by a competent person is required to establish the level of risk.   

Noise measurements and personal dosimetry provide objective evidence of actual workplace exposure.

What noise level requires hearing protection at work?

Under the UK noise regulations, hearing protection must be made available at the relevant exposure action values and appropriate measures must be taken to ensure it is used where required.

However, hearing protection should not be the first or only response to excessive workplace noise.

Employers should consider eliminating or reducing noise at source through engineering and organisational controls. Examples include quieter machinery, acoustic enclosures, isolation, maintenance and reducing exposure time.

Consideration must also be given to staff members who already have pre-existing damage or wear hearing aids.  

Hearing protection should then be selected to provide appropriate attenuation without unnecessarily interfering with communication, warning signals or other safety-critical sounds.

Does my business need a noise assessment if employees only use noisy machinery occasionally?

Yes.  Occasional use does not automatically mean that noise exposure is insignificant.

Exposure depends on both noise level and duration. A very noisy process can produce significant exposure in a relatively short period.

For example exposure from a grinder at 103 dB(A) for 7.5 mins has the same exposure as 85 dB(A) for 8 hours. 

The assessment should therefore consider the actual working pattern, including all noisy tasks carried out during the working day.

Where employees move between noisy and quiet activities, personal noise dosimetry can be particularly useful because it measures overall exposure rather than simply recording the level of an individual machine.

How do you measure employees' daily noise exposure?

Personal noise exposure is normally assessed using a noise dosimeter worn by the employee during representative periods of work.

The instrument records noise exposure over time and allows the occupational hygienist to determine the employee’s daily or weekly personal noise exposure.

Area or spot measurements can also be useful for identifying noisy processes and investigating individual sources.  This is conducted using a calibrated Sound Level Meter (SLM). 

The important consideration is that measurements should represent the employee’s normal working activities, rather than simply measuring the loudest equipment in the workplace.

What is personal noise dosimetry and when is it needed?

Personal noise dosimetry involves an employee wearing a noise measuring instrument during their normal work.

It is particularly useful where employees:

  • Move between different work areas 
  • Perform several different tasks 
  • Use multiple pieces of equipment 
  • Experience variable noise levels 
  • Spend only part of their working day in noisy areas 

A dosimeter provides information about the employee’s overall exposure and can therefore be more representative than measurements taken at a single fixed location.

What should a workplace noise survey report include?

A useful workplace noise survey report should explain:

  • The purpose and scope of the assessment 
  • Areas, processes and employees assessed 
  • Measurement methods 
  • Equipment used 
  • Working conditions during the survey 
  • Noise measurement results 
  • Personal exposure results where applicable 
  • Interpretation of the findings 
  • Areas or employees requiring further action
  • Health Surveillance requirements
  • Information, Instruction and Training requirements  
  • Recommendations for noise control 

The purpose of the report should not simply be to provide a collection of decibel readings.

A good occupational hygiene report should help an employer understand what the results mean, how they comply with the law and what they should do next.

How can I reduce noise exposure in the workplace?

The most effective way to control workplace noise is to reduce it at source.

Possible measures include:

  • Selecting quieter machinery 
  • Modifying processes 
  • Enclosing noisy equipment 
  • Installing acoustic barriers 
  • Isolating vibrating machinery 
  • Improving equipment maintenance 
  • Increasing separation from noise sources 
  • Reducing exposure time 
  • Restricting access to noisy areas 

Hearing protection can provide additional protection where necessary, but engineering and organisational controls should be considered first.

A noise survey can help identify which sources and processes should be prioritised.